|
Getinge Floor Loaded 9100 - Series Washer - Disinfector
The 9100 Floor-Loading Cart Washer/Disinfector is just the latest standard-setting product in the healthcare market.
The full view, glass door is as substantial as it is beautiful – rivaled only by the performance of the machine.
Full view, glass door
The tempered glass door effortlessly glides at the operator’s touch – opening to a generous load chamber with a large door clearance. The automatic sliding door saves floor space by eliminating manually swinging doors and provides a complete view of the chamber. The door stops immediately if the switch is released or the door is obstructed. A new cycle will not start until door is completely sealed. The illuminated chamber during all operations makes it easy to overview the process.
Fast cycle
There are three secrets behind the time-saving feature:
Product Description
The Getinge 9100 Series features the PACS 3500 microprocessor control system with 12 operator ready cycles to choose from. Units can be recessed in a shallow 6inch (150 mm) pit for level floor loading or mounted directly on the floor with ramp for loading and unloading. The 9100 are standard with an exclusive full view, power sliding glass door for loading and unloading operations. All models feature vertically mounted, lateral sweeping, jet spray manifold system mounted along both walls of the chamber, level walkable flooring, selectable power floor tilt, and integrated hot air drying. Circulation and heating system is packaged on the service side of the machine and includes two peristaltic chemical dosing pumps, with flow control monitoring (standard) enclosed steam heat exchanger main wash pump, drain pump, self-cleaning filter and effluent drain cool down tank. Optional wash solution saving tanks help reduce consumptions and speed transition to the next cycle.
Pit depth only 150 mm
The shallow pit means that the Getinge 9100 can be installed in most buildings without any problem. In addition, the shallow sump holds little water, thus minimizing water and detergent consumption and reducing heat-up times.
Lateral washing system
In addition to spray arms between all levels of the manifold wash carts, the Getinge 9100-series has a lateral side-washing system. This ensures superior cleaning results, as the water jets continuously reach both the inside and outside of all types of items.
Booster and saving tanks
In order to reduce cycle times, an optional booster tank can be installed. Saving tanks for reduction of detergent and water consumption and cycle times are also available as options.
Unique docking to cart
To make loading and unloading as simple as possible, the Getinge 9100-series has a flat floor. Thanks to the new automatic docking to the manifold wash carts, the floor remains smooth, even when using carts requiring a water connection from below.
Outstanding drying system
The drying air passes through a HEPA filter and an air-toair heat exchanger before entering the chamber through multiple entry ports. The turbulent air conditions reduce the drying time to a minimum.
Product Features
Power operated, full size, glass doors.
The 9100 tempered glass door effortlessly glides under the operator’s touch – opening to a generous load chamber with a door clearance of 37" wide x 78" high (960 mm x 2000 mm).
• Saves floor space by eliminating manually swinging doors
• Provides complete view of chamber
• For operator safety, the door-close operation requires operator’s constant touch
• Door immediately stops if the switch is released or door is obstructed
• Glass compresses the chamber gasket to assure a watertight seal
• Cycle will not start until door is completely sealed
• Load and unloading doors are interlocked to maintain integrity of barrier wall
• Chamber is illuminated during all operations
• Unload door is opened by the single touch of a switch
The 9100 Series Floor-Loading Cart Washer/ Disinfector is offered in three chamber lengths:
• Getinge 9120 – 78" long (2000 mm), 130.3 ft.3 (3.69 m3)
• Getinge 9125 – 98" long (2500 mm), 163.7 ft.3 (4.64 m3)
• Getinge 9128 – 112" long (2850 mm), 187 ft.3 (5.3 m3).
 |
Parallel, jet spray, manifold system. Getinge’s exclusive, parallel, jet spray manifold oscillates in a sweeping motion to reach all surfaces and to strip away soils. Eight parallel pipes on each wall are fitted with eight nozzles each, providing complete and constant coverage from floor to ceiling. This innovative design yields washing results consistently superior to spinning arms, alternating spray systems or halo wreaths. |
||
 |
Oscillating Jet-Spray Manifold Oscillating, lateral sweeping, vertical jet-spray manifolds with 128 spray jets evenly distributed throughout the chamber provide full load coverage during the entire cycle for optimum cleaning. Both tubes and jets are easily removable without tools for easy maintenance. Non-recirculated, vented, drying system A powerful brushless fan motor forces fresh air through steam coils to reach peak temperature in seconds. Turbulent hot air is forced through 20 chamber ports for rapid drying. Optional power tilt raises the floor on one side to drain excess water and facilitate thorough drying. Heat exchanger uses hot exhaust air to heat fresh, incoming air. Vented air gap helps to dry the chamber air that enters through the building exhaust vent. |
||
 |
Advanced control system. Getinge’s user-friendly PACS 3000 controls offer exclusive built-in monitoring and security features that help deliver cleaning and disinfection performance for each and every cycle. Large, color display and intuitive, flexible soft-key controls facilitate on-screen modifications of cycle parameters and quick reference of cycle values – even at a distance. The operator control panel is conveniently mounted at eye level beside the door. • Choose from 14 programmed cycles • Powerful, user-friendly controls • Audible and visual feedback • Real-time, continuous display of cycle values with cycle countdown • Quick, on-screen editing of cycle parameters • Comprehensive, process, fault messaging • Password-protected supervisory and service-level security • Set up users’ lists with individual password access • Independent process temperature supervision • Pressure monitoring over circulating pump • Detergent control of one to four chemical dosing pumps with flow meter control for increased accuracy • Integral printer option for record keeping • Dual COM ports for RS232 and RS485 • Remote monitoring with T-DOCTM interface. |
Ease of maintenance.Each manifold nozzle is easily removed with a simple quarter-turn. Each parallel manifold pipe is spring loaded and is easily removed by pulling down until the top of the pipe is free. After cleaning, the manifold pipe is reinserted, and the spring is compressed until the top of the pipe can be inserted into the upper manifold.
Non-recirculated, vented, drying system.
Powerful, brushless, fan motor forces fresh air through steam coils to reach peak temperature in seconds. Turbulent, hot air is forced through 20 chamber ports for rapid drying. Optional, power tilt raises the floor on one side to drain excess water and facilitate thorough drying. Heat exchanger uses hot, exhausting air to heat fresh, incoming air. Vented air gap helps dry, chamber air that enters through the building exhaust vent.
THE OPTIMAL FLOOR SYSTEM
In-floor trolley docking.
To make loading and unloading as simple as possible, the Getinge 9100-series has a flat floor. When using trolleys with spray arms, the docking is done automatically. The integrated controller automatically alternates pump pressure between chamber-wall manifolds and trolley injector. Water pressure lifts injector to connect with manifold-wash cart, sending wash and rinse solutions through spray arms to internal surfaces of containers. The injector automatically seals if the manifold trolley is not being used.
Easy floor loading.
Loading is level with the floor in pit-mounted applications. When the unit must be mounted on the floor – a modest 6" incline ramp makes loading easy.
Flat chamber floor.
Provides a safe, level surface to walk on when loading and unloading heavy carts and trolleys – free of all tracks for wheels or tilting carts. Transition plate.
Automatically extends to cover sliding door track, providing a smooth transition into the chamber for wheels of all sizes. Prevents damage to bottom door gasket. Automatically retracts when door’s close button is pressed.
Power floor tilt.
Automatically raises one side of the chamber floor to slope and drain closed case carts following final rinse. Floor is automatically returned to level at completion of cycle for ease of unloading and subsequent loading.
DESIGNED WITH PRODUCTIVITY AND SAFETY IN MIND
The Getinge 9100 safety advantage.
It is no longer possible for the door to accidentally swing closed during loading or unloading operations, or during routine inspections of the chamber.
• Full view, glass door – assures complete vision of chamber contents from both sides
• Illuminated chamber – assures operator can see contents of chamber in all lighting conditions
• Maintain contact switch – assures operator is outside the chamber when the door is closing
• Door safety switch – assures cycle cannot start until the glass door is completely sealed
• Door interlock switches – assure that the opposite door cannot be opened at the same time
• Emergency stop with key lock – halts operation and prevents further use of the machine
• Emergency chamber cable – assures backup means to stop operation from inside the chamber
• Normally unsealed doors – doors unseal during stop or power failure
• Manual sliding door – can be manually moved whenever unsealed.
Innovative shallow pit construction
The shallow pit of only 150 mm (6 inches) means that the Getinge 9100-series can be installed in most buildings without any problem. In addition, the sump holds a small volume of water, which in turn results in low water and detergent consumption and short heat-up times.
Productivity.
Getinge’s 9100-series has several unique new features that can reduce process times and
consumption of utilities! Process times can be as short as 15 minutes, and virtually all types of
bulky items can be accommodated in one and the same machine. The result is a substantial
improvement in efficiency and economy in your department.
PRODUCT SELECTIONS
Effective Chamber Load Size
o Model 9120
37.7â€W x 78.7â€H x 78â€L (960 x 2000 x 2000 mm)
o Model 9125
37.7â€W x 78.7â€H x 98â€L (960 x 2000 x 2500 mm)
o Model 9128
37.7â€W x 78.7â€H x 112â€L (960 x 2000 x 2850 mm)
Pit Mounted – Space Requirements above Floor
o Model 9120
116â€W x 107â€H x 98â€L (2946 x 2705 x 2500 mm)
o Model 9125
116â€W x 107â€H x 118â€L (2946 x 2705 x 3000 mm)
o Model 9128
116â€W x 107â€H x 132â€L (2946 x 2705 x 3350 mm)
Installation Mounting
o 6†(150 mm) Deep Pit Mounted Machine
o 6†(150 mm) High Floor Mounted Machine Base
o 4ft (1219 mm) Long Ramp, Qty. – 2
PRODUCT SELECTIONS
Effective Chamber Load Size
o Model 9120
37.7â€W x 78.7â€H x 78â€L (960 x 2000 x 2000 mm)
o Model 9125
37.7â€W x 78.7â€H x 98â€L (960 x 2000 x 2500 mm)
o Model 9128
37.7â€W x 78.7â€H x 112â€L (960 x 2000 x 2850 mm)
Pit Mounted – Space Requirements above Floor
o Model 9120
116â€W x 107â€H x 98â€L (2946 x 2705 x 2500 mm)
o Model 9125
116â€W x 107â€H x 118â€L (2946 x 2705 x 3000 mm)
o Model 9128
116â€W x 107â€H x 132â€L (2946 x 2705 x 3350 mm)
Installation Mounting
o 6†(150 mm) Deep Pit Mounted Machine
o 6†(150 mm) High Floor Mounted Machine Base
o 4ft (1219 mm) Long Ramp, Qty. – 2
Location of Controls and Service Access
o Right-Hand Controls & Service
o Left-Hand Controls & Service
Barrier Wall Trim & Service Enclosure
o Pit Mounted Machine with Set of Barrier Wall Panels
o Floor Mounted Machine with Set of Barrier Wall Panels
o Pit Mounted with Cabinetized Service Area
o Floor Mounted with Cabinetized Service Area
Supply Voltage for Steam Heated Machines
o 208 Volt, 3Phase
o 230-240 Volt, 3Phase
o 380 Volt, 3Phase
o 400-415 Volt, 3Phase
o 480 Volt, 3Phase
o 600 Volt, 3Phase.
