Getinge CM 320 - Series Washer - Disinfector
The highly automated tunnel washer
The new Cage and Utensil Tunnel Washers are designed to clean, sanitize, and dry metal or plastic cages, utensils and racked watering bottles in animal research laboratories. These highly automated, heavy-duty, tunnel-type, hydro-spray washers are designed for continuous high-volume processing. Units can be recessed in one or two walls, or installed freestanding.
Taking hygiene to a completely new level
Getinge CM 320-series is a reliable, high-performance multi-chamber washer-disinfector that combines high capacity with compact design. Thanks to its modular design and broad range of accessories, it is easily adaptable to the needs of each customer. But more than anything else, Getinge CM 320 offers a whole new level of hygiene, based on unique features of function and clean ability.
The GETINGE CM320-series are multi-purpose, modular composed and fully automatic multi-chamber index washer disinfectors available as 2, 3, 4 or 5 chamber version. Wash-, Drying and Ultrasonic Modules are independently monitored and can be configured according to the specific requirements. With a capacity of15 DIN trays, this index washer disinfector is dedicated to handle large volumes of goods within the shortest time and at the highest level of hygiene.
Getinge CM320 features an advanced, but user-friendly control system. A scanner automatically reads the barcodes, selects the right process and runs through every step automatically. The automatic loading and unloading conveyors further helps the work in transporting the wash carts to the washer-disinfector and allows for an ergonomically safe and time efficient process.
|Getinge CM 320 - Series||Unit||Features in short|
|Chamber volume||L / Cu. ft.||343 / 12.1|
|Chamber width||mm / in||650 / 25.6|
|Chamber depth||mm / in||800 / 31.5|
|Chamber height||mm / in||660 / 26|
|DIN 1/1* trays/load||pcs||15|
|SPRI 1** trays/load||pcs||10|
(*DIN 1/1 = 480 x 250 x 50 mm) and (**SPRI 1 = 450 x 340 x 70 mm)
Automatic Five Phase Treatment Cycle
The standard treatment cycle consists of a pre-wash, an agent wash, a recirculated rinse, a non-recirculated fresh hot potable water rinse and a hot air dryer system. The agent wash and recirculated rinse treatments are recirculated under pump pressure. The cycle, once activated, is completely automatic.
Wash And Rinse Treatment Temperature Guarantee
The wash and rinse temperatures are guaranteed to insure that minimum treatment temperatures are attained and maintained. Should the temperature guarantee set points not be attained or maintained, the conveyor belt will temporarily stop until the treatment solution reaches the set-point temperature. All temperature guarantee variances are annunciated to the operator.
Hydraulic Hold Down System
Spray header throttle valves are properly sized and positioned to hydraulically hold down light plastic cages and steel pans to the conveyor belt.
The hot tap final rinse water is sprayed through the jet system and collected in the rinse tank. The water is used for the recirculated wash, rinse and pre-wash for water and energy conservation.
Removable side-hinged doors facilitate access to the chamber interior. Each door incorporates a large, water-tight tempered glass panel for full observation of the treatment process.
|Additional standard features:||Optional features:|
|• Automatic, Five-Phase
• Treatment Cycle
• Automatic Drain System
• Stainless Steel, Flat-Wire, Conveyor Belt
• Forced Air Dryer Section
• Monitored Drain-Discharge, Cool-Down Injection System
• External, Stainless Steel, Shell and Tube, Heat Exchangers
• Removable Spray Headers
|• Self Cleaning Rinse Filter
• Exhaust Fan
• Vapor Condenser
• Monitored Alkaline, Detergent System
• Monitored Acid, Detergent System
• Rinse Agent Injection
• Descaling Agent Injection
• pH Neutralizing
• Ethernet Connection